LG 32LT380H - Manual (Página 39)

Connecting to a CI Module
View the encrypted (pay) services in digital TV
mode.
USB IN
IN
3
H/P
USB IN
IN
3
R
Check this point as shown
and insert the CI Module.
y Check if the CI module is inserted into the
PCMCIA card slotin the right direction. If
the module is not inserted properly, this can
cause damage to the TV and the PCMCIA
card slot.
NOTA
USB IN
IN
3
H/P
USB IN
USB IN
IN
3
R
or
Connecting to a USB
Connect a USB storage device such as s USB
flash memory, external hard drive or a USB
memory card reader to the TV and access the My
media menu to use various multimedia files.
USB IN
IN
3
H/P
USB IN
IN
3
R
Headphone connection
Transmits the headphone signal from the TV to an
external device. Connect the external device and
the TV with the headphone as shown on the follow-
ing illustration.
y AUDIO menu items are disabled when
connecting a headphone.
y When changing AV MODE with a
headphone connected, the change is
applied to video but not to audio.
y Optical Digital Audio Out is not available
when connecting a headphone.
y Headphone impedance: 16 Ω
y Max audio output of headphone: 10 mW
to 15 mW
y Headphone jConfirmación size: 0,35 cm
NOTA
Datos00 : High channel Datos
Datos01 : Low channel Datos
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don’t care
Datos02 : 0x00 : Analogue Main
0x10 : DTV Main
0x20 : Radio
Channel Datos range
Analogue - Min: 00 to Max: 63 (0 to 99)
Digital - Min: 00 to Max: 3E7 (0 to 999)
25. 3D(Comando: x t) (Sólo 3D MODELOS)
(Depending on model)
► To change 3D mode for TV.
Datos Structure
Datos01 00 : 3D On
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
Datos02 00 : Top and Bottom
01 : Side by Side
02 : Check Board
03 : Frame Sequential
Datos03 00 : Right to Left
01 : Left to Right
Datos04 3D Effect(3D Depth): Min : 00 ~ Max : 14
(*transmit by Hexadecimal code)
*If Datos1 is 00(3D On), Datos4 has no meaning.
*If Datos1 is 01(3D off) or 02(3D to 2D), Datos2, Datos3 and
Datos4 have no meaning.
*If Datos1 is 03(2D to 3D), Datos2 and Datos3 have no mean-
ing.
Datos 1 Datos 2 Datos 3 Datos 4
00 O O X
01 X X X
02 X X X
03 X X O
X : don’t care
Transmisión [x][t][ ][Set ID][ ][Datos01][ ][Datos02]
[ ][Datos03][ ][Datos04][Cr]
Confirmación [t][ ][OK][Datos01][Datos02][Datos03]
[Datos04][x]
[t][ ][NG][Datos01][x]
26 . Extended 3D(Comando: x v) (Sólo 3D
MODELOS)
(Depending on model)
► To change 3D option for TV.
Datos01 : 3D option
00 : 3D Picture Correction
01 : 3D Depth (2D to 3D Sólo)
02 : 3D Viewpoint
03 : 3D Picture Size (Plasma TV Sólo)
04 : 3D Picture Balance (Plasma TV Sólo)
05 : 3D Optimization (Active type (LCD TV) Sólo)
Datos02 It has own range for each 3D option determined
by Datos01.
1) When Datos01 is 00
00 : Right to Left
01 : Left to Right
2) When Datos01 is 01, 02
Datos Min: 0 ~ Max: 14(*transmit by Hexadecimal code)
Datos value range(0~20) converts Viewpoint range(-10~10)
automatically(Depending on model)
3) When Datos01 is 03
00 : Just Scan
01 : 16:9
4) When Datos01 is 04
00 : Off
01 : On
5) When Datos01 is 05
Datos Min: 0 ~ Max: 02(*transmit by Hexadecimal code)
* Refer to ‘Real Datos mapping’.
Transmisión [x][v][ ][Set ID][ ][Datos01][ ][Datos02][Cr]
Confirmación [v][ ][OK][Datos01][Datos02][x][v][ ][NG]
[Datos01][x]
Los números de modelo y serie de la TV
se encuentran en la parte posterior del
producto.
A n óte l os p o r s i a l g u n a vez n e ces i t a
asistencia.
MODELO
N.º DE SERIE