Siemens HB84E562 - Manual (Página 43)

43
Problem Remedial action/notes Possible cause
A signal sounds. The two dots in
the display are flashing.
The appliance is in
demonstration mode.
1. Press the 2 button.
2. Press and hold the h button
for 3 seconds.
The demonstration mode is
deactivated.
Error message "Er1" or "Er4"
appears in the display.
The temperature sensor has
failed.
Call the afterĆsales service.
Error message "Er11" appears in
the display. "Button is jammed"
The buttons are dirty or the
mechanics have jammed.
Press all buttons several times,
and if this does not help,
contact the afterĆsales service.
Error message "Er19" appears in
the display.
There is extreme overheating
(possibly a fire inside).
Microwave power setting too
high.
Do not open the door.
Disconnect from the mains or
switch off the fuse in the fuse
box and allow to cool down.
Error message "Er17", "Er18" or
"Er20" appears in the text display.
Technical fault. Call the afterĆsales service.
Risk of electric shock.
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained afterĆsales engineers.
The oven light bulb is replaceable. HeatĆresistant 25
V, 240 W halogen bulbs can be obtained from the
afterĆsales service or a specialist retailer.
Always remove the new halogen bulb from the
packaging using a dry cloth. This increases the
service life of the bulb.
1. Unplug the appliance from the mains or switch off
the circuit breaker in the fuse box.
2. Open the appliance door.
Undo the two screws from the right and left of the
oven.
3. Place a tea towel in the cold oven to prevent
damage.
Carefully lift out the appliance.
d
Replacing the oven
light bulb